The 120V Plug-In Ceramic Kiln for New Hobbyists
The Jen-Ken AF3C 11/9 is the most accessible ceramic kiln in our catalog. Built for new ceramic hobbyists who want to fire low fire clay at home without committing to a 240V install. Plug it into a standard household outlet and you're ready to fire. The interior is an 11" x 9" chamber with 0.5 cubic feet of capacity, sized right for small pieces, test firings, jewelry, beads, and the kind of projects beginners and developing potters actually make.
It fires up to 2100°F, which is built specifically for cone 04 to 06 low fire ceramics. That's the temperature range for low fire earthenware, underglazes, glaze tests, and most beginner ceramic projects. The kiln also handles glass fusing and slumping, so if you're exploring both disciplines as a hobbyist this one kiln covers your range.
The Orton AF3C controller comes pre-loaded with easy to use Cone Fire programs for the most common ceramic firings, so you don't need to learn firing schedules from scratch. Just pick your cone, hit start, and the kiln does the work.
Important: dedicated 20 amp circuit and full 120V required
This kiln draws 15 amps and needs to run on a dedicated 20 amp circuit, not a shared circuit with other appliances. Jen-Ken also recommends a full 120V supply (not 110V or 115V, which are common in older homes) for the kiln to reach its full potential. If your outlet shows lower voltage or shares a circuit with other appliances, your firings will be slower and less reliable. Give us a call before ordering if you want help confirming your setup.
Included with every order
A heavy duty stand sized for this kiln, the full operator manual, the AF3C Orton digital controller with pre-loaded Cone Fire programs, a 2 year limited warranty through Jen-Ken, and free shipping to the US Lower 48.
Who Is This Kiln For?
The AF3C 11/9 is built for a specific kind of artist. Here's how to tell if that's you.
✓ New ceramic hobbyists starting at home
If you're new to ceramics and want to fire low fire clay at home without an electrician or panel upgrade, this is the easiest way to start.
✓ Potters doing test firings and glaze trials
If you have a bigger kiln but want a small dedicated test kiln for glaze experiments and design prototypes, this saves you firing a whole load just to test one piece.
✓ Jewelry makers and bead artists
11" x 9" is the right size for batches of pendants, beads, small components, and jewelry findings. Fires both ceramic and glass work for mixed media jewelry.
✓ Apartment dwellers and small space studios
120V plug, 50 lb tabletop design, no rewiring needed. Real ceramic firing capability in spaces that can't accommodate a full size kiln.
The AF3C 11/9 ships with the Orton AF3C controller with pre-loaded Cone Fire programs, exactly what most beginners need. If you want more flexibility on custom schedules as you grow, upgrade at checkout to the AutoFire 12 Key, the touchscreen AutoFire Slide, or the TAP Smart Controller with Wi Fi.