Kiln Accessories

Compatible with: HS-24K - 24" Knife Oven see here This Hot Shot Stand is perfect for your oven. With rolling and locking casters it...

Used to protect kiln shelves and kiln floor when firing glass items directly on the shelf. May be used on cordierite and smooth ceramic fi...

Furniture Kit for DD14/DD14 Car and DD17/DD17 Car Kilns 8 each – 14″ x 28″ x 1″ shelves, 8 each – 3-, 6-, 9- and 12-inch large square posts, and a ...

16 each – 15″ x 15″ x 1″ shelves, 16 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of kiln wash 4 each – 15″ x 15″ x 1″ square ...

16 each – 16″ x 16″ x 1″ shelves, 16 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of kiln wash 4 each – 16″ x 16″ x 1″ square ...

16 each – 18″ x 18″ x 1″ shelves, 16 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of kiln wash 4 each – 18″ x 18″ x 1″ square ...

16 each – 20″ x 20″ x 1″ shelves, 16 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of kiln wash 4 each – 20″ x 20″ x 1″ square ...

Furniture Kits for gas kilns.

Furniture Kit for 18″ Torchbearer Gas Kilns 1 each – 13″ x 13″ round shelf, 4 – 13″ x 7″ half-round shelves, 6 each – 3-, 5-, 6-, and 8-inch small ...

Furniture Kit for 18″ Raku Gas Kilns 1 – 13″ x 13″ round shelf, 4 – 13″ x 7″ half-round shelves, 6 each – 3-, 5-, 6-, and 8-inch small square posts...

Furniture Kit for 23″ Gas Kilns 6 each – 19″ x 9″ x 1″ half-round shelves, 6 each – 3, 6, 9, 12-inch large square posts, and a 1 lb bag of kiln wash

Furniture Kit for 28″ Raku & Torchbearer Gas Kilns 6 each – 24″ x 12″ half-round shelves, 6 each – 3, 6, 9, 12-inch large square posts, and a 1...

Furniture Kit for 23″ Raku Gas Kilns 6 – 19″ x 9″ x 1″ half round shelves, 6 each – 3, 6, 9, 12 inch large square posts, 1 lb bag of kiln wash, rak...

Furniture Kit for 28″ Raku Gas Kilns 6 – 24″ x 12″ half-round shelves, 6 each-3, 6, 9, 12-inch large square posts, 1 lb bag of kiln wash, raku tong...

8 each – 11″ x 22″ x 1″ shelves, 8 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of kiln wash 2 each – 11″ x 22″ x 1″ rectangle...

Furniture Kit for DD12 & DD12 Car Kiln 8 each – 13″ x 26″ x 1″ shelves, 8 each – 3-, 6-, 9-, and 12-inch large square posts, and a 5 lb bag of ...

An Electronic Wall unit changes a manual kiln (kiln sitter or pyrometer) to an electronically controlled kiln or can be purchased with a new kiln f...

VentMaster-downdraft vent system for electric kilns During operation, the Kiln Vent system keeps the kiln under slight negative pressure. This pull...

Electro Sitter will replace your obsolete kiln sitter model! The Electro Sitter comes with an electronic controller of your choice for cone-fire or...

The TPI 343 is a Dual Input K-Type Thermocouple thermometer with field calibration and a -58 to 2,462 °F (-50 to 1,350°C) temperature range.It come...

Compatible with all units, except the HS-24G & HS-24K.  This Hot Shot Stand is perfect for your oven. With rolling and locking caster...

The Hot Shot Vitrigraph Lift options are a sturdy, heat-resistant structure designed to securely hold your kiln for vitrigraph glasswork. T...

Knife Rack Kit includes (1) 5.5" x 5.5" base and (10) Ceramic Pins Order a Oven set that is specifically configured based on the size of your Oven/...

Argon provides an inert atmosphere and is usually delivered at dew point less than -75°F with an oxygen content below 20 ppm. An atmosphere...