| Model | AF3P Bonnie Glo |
| Max Temperature | 1700 °F |
| Inside Dimensions | 15" x 5" |
| Volume (Cu. Ft.) | 0.5 |
| Power Plug Type | NEMA 5-15 |
| Voltage | 120 |
| Watts | 1560 |
| Amps | 13 |
| Shipping Weight (lbs.) | 45 |
| Product Weight (lbs.) | 35 |
This Unique All Fiber Kiln is incredibly quick. Since it is made from fiber, most of the heat is absorbed by the glass and not the kiln. This allows a painter or fuser to do a few firings a day.
The cool down is also quick since the fiber does not absorb the heat like fire brick.
There is not a shelf either, you can use fiber paper on the bottom, kaiser lee board, or lava cloth.
Solid State Relay
A Solid State Relay is hands down the best investment you can make in your kiln!
The relay is what controls the power cycling of the elements in the kiln and they need to be able to withstand a ton of power as they do so. The solid state relays are incredibly efficient compared to the standard mechanical relays and are able to operate at much faster speeds. What this equates to is incredibly tight temperature control for accurate firings, longer element life, and savings on your electrical bill!
The standard mechanical relays have moving parts which cause wear and tear over the years and will eventually need to be replaced; however with a solid state relay it's likely to last the entire life of the kiln! You will save money and time by never needing to worry about this in the future!
Stand with caster wheels
The standard order of this kiln comes with a stationary stand built to handle the weight, heat, and shape of the kiln. While this works perfectly fine, attempting to move your kiln can be a difficult maneuver and could result in a damaged stand, or worse - a broken kiln!
Ordering a stand with caster wheels ensures the whole process of moving your kiln for any reason is a smooth and simple process.
No longer worry about if you're running out of room within your garage - you can tuck your kiln away in a corner when it's not in use! And of course - if you're one for moving the kiln around the studio or other rooms, this is essentially a necessity.
When ordered with a vent system - make sure to detach first before moving the kiln.
Depending on the model, the stand will vary in height. Its primary use is for mobility.