Stackable Top-Loading Electric Kiln — Cone 8, Bartlett KilnStar Controller
The 1823E is a deep stackable 240/208-volt top-loading electric kiln for studio ceramics and everyday production. Its 22.5″-deep chamber gives you 3.29 cu ft — noticeably more room for taller ware and bigger loads than the 18″-deep 1818E — with 2½″ firebrick rated to a full cone 8.
Stackable models use the Olympic-proven electrical box design — heat shields with top and bottom perforations keep the electrical components cool — and balanced heating elements deliver even heat throughout the chamber under all firing conditions. The sectional build means the kiln comes apart for moving through narrow doorways and for single-section access during maintenance.
Included with every order
Pilot light, metal stand, stainless steel jacket, Bartlett KilnStar digital controller, full operator manual, and a 2-year limited kiln warranty through Olympic.
A note on power: this model needs a 40-amp circuit with a NEMA 6-50 receptacle — a step up from the 30-amp service the smaller stackables use. Worth confirming with an electrician before you order.
Options include the Genesis touchscreen controller, lid lift assist, 2- or 3-zone control, Type S thermocouple, 480V wiring, a vent, and castors. Give us a call and we'll help you spec the right configuration for your studio.
Key Features
-
Deep 3.29 cu ft chamber — 17.5″ × 22.5″ handles taller ware and bigger loads than the 1818E
-
2½″ firebrick walls — cone 8 / 2300°F (1260°C) for ceramics, glaze firing, and studio production
-
Stackable sectional design — separates for transport through narrow doorways and single-section maintenance access
-
Bartlett KilnStar digital controller (standard) — cone-fire and ramp-hold programming; optional Genesis touchscreen upgrade
-
Balanced heating elements for even heat distribution under all firing conditions
-
Olympic electrical box design — heat shields with top-and-bottom perforations extend relay and element life
-
Complete studio package — pilot light, metal stand, and stainless steel jacket, ready to fire
-
Lid lift assist & multi-zone control available for frequent firing schedules and dense loads
-
2-year limited warranty — built in the USA by Olympic Kilns
Full Specifications
| Model |
1823E (Stackable Top-Loading Electric) |
| Inside Chamber (W × D) |
17.5″ × 22.5″ |
| Capacity |
3.29 cu ft |
| Outside Dimensions with Stand (W × D) |
29.5″ × 35.5″ |
| Brick Thickness |
2.5″ |
| Maximum Temperature |
Cone 8 – 2300°F / 1260°C |
| Lid Lift Assist |
Optional |
| Voltage |
208V / 240V · 1-phase |
| Amps |
30 A @ 208V · 26.25 A @ 240V |
| Watts |
6,300 W |
| Breaker Required |
40 A |
| Plug Configuration |
NEMA 6-50 |
| Recommended Copper Wire |
#8 (#6 if circuit > 40 ft) |
| Controller |
Bartlett KilnStar (Genesis optional) |
| Est. Ship Weight |
185 lbs |
Not sure if this is the right kiln for you?
Give us a call. We'll talk through your space, your power setup, and what you're firing, and help you land on the right kiln.
📞 (801) 839-5882
Monday to Friday, 9AM to 5PM MST
Olympic 1823E FAQ
How much firing space does the Olympic 1823E provide?
The 1823E has a 3.29 cu ft chamber measuring 17.5 inches wide by 22.5 inches deep, giving you room for taller ware and larger pottery loads.
What electrical service does this kiln need?
This 208V/240V single-phase kiln uses 6,300 watts and requires a 40-amp breaker with a NEMA 6-50 receptacle. Confirm the circuit and installation with a qualified electrician before ordering.
What controller and warranty are included?
Every order includes the Bartlett KilnStar digital controller, pilot light, metal stand, stainless steel jacket, operator manual, and a 2-year limited Olympic kiln warranty.
Can the 1823E be moved through a narrow doorway?
Yes. Its sectional, stackable design allows the kiln to come apart for transport and gives you single-section access for maintenance.
