Evenheat 818 Salt Bath Furnace – Large Electric Salt Pot for Heat Treating & Hardening

1. What are you firing?
Different materials have different temperature requirements. Pottery and stoneware need to reach cone 6–10 (around 2200–2350°F), while glass fusing works at lower temperatures but demands very precise, programmable cooling. Knowing your primary material upfront narrows your options significantly.

2. How much volume do you need?
Think about how many pieces you fire per week. Hobbyists and home studios generally do well with kilns under 5 cubic feet. Working artists typically need 5–10 cubic feet, and classroom or production studios often require 10+. A good rule of thumb: buy slightly larger than you think you need — you can always fire a half-full kiln, but you can't fire a piece that doesn't fit.

3. Check your electrical setup before you buy
Most mid-to-large kilns require a 240V dedicated circuit, which may need to be installed by a licensed electrician. Smaller kilns may run on standard 120V. Always check the kiln's amperage requirements against your existing panel before purchasing — electrical upgrades can add $200–$500 to your setup cost.

4. Manual vs. digital controller
Manual kilns use switches you adjust by hand throughout the firing, requiring you to stay close. Digital controllers let you program a firing schedule and walk away. For most potters today, a digital controller is worth the extra cost — the results are more consistent and the convenience is hard to give up once you've had one.

5. Don't forget ventilation
Kilns release fumes from clay, glazes, and organic materials during firing. A downdraft vent system is strongly recommended for any indoor studio. It protects your health, improves firing results, and extends the life of your elements. Budget around $150–$300 for a quality vent, and factor it into your total setup cost from the start.

6. Think about long-term running costs
The purchase price is just the beginning. Heating elements need replacing every 100–200 firings ($100–$300 depending on kiln size). Electricity costs $2–$8 per firing depending on your kiln size and local rates. You'll also need kiln furniture — shelves, posts, and stilts — which are typically sold separately and are essential from day one.

The right size depends on how much you fire and how often. Hobby potters or small home studios generally do well with a compact kiln (under 5 cubic feet), while working artists and classroom studios benefit from a larger kiln like the Olympic Champ XL. Consider how many pieces you fire per week — if you're constantly waiting to fill a small kiln, it's time to size up. It's usually better to buy slightly larger than you think you need.

Top-loading kilns are the most common for pottery and ceramics. They're more energy-efficient, easier to load evenly, and generally more affordable. Front-loading kilns (also called car kilns or door kilns) are better suited for large sculptural work or production studios where loading heavy pieces at waist height is more practical. For most potters, a top-loader like the Champ XL is the right choice.

Electrical requirements vary by kiln model and size. Many mid-size and larger kilns require a dedicated 240V circuit, while some smaller models may operate on 120V. It is important to check the kiln’s specifications for the correct voltage, amperage, outlet type, and breaker requirements before installation. A qualified electrician should handle installation if a new circuit or outlet is needed. Never use a kiln with an outlet or circuit that does not match the manufacturer’s requirements.

Yes, in some cases — but it depends on the kiln and how you plan to use it. Many electric kilns can be used for both pottery and glass, but the firing schedules for each are very different. Glass typically requires slower, more precise heating and cooling cycles to help prevent cracking, while pottery firing follows different temperature and timing needs. If you plan to fire both, a kiln with a programmable controller is especially helpful for managing and switching between firing programs. Always check the kiln manufacturer’s recommendations before using it for multiple materials.

The cone temperature a kiln can reach depends on the specific model. Many ceramic kilns are designed to fire anywhere from low-fire ranges like cone 06–04 up through mid-fire and, in some cases, high-fire ranges such as cone 8–10. Always check the kiln’s product specifications to confirm its maximum cone rating and make sure your clay and glaze are compatible with that firing range.

A kiln vent is strongly recommended, though it may not be included with your kiln purchase. During firing, kilns release fumes from clay, glazes, and organic materials — these can be harmful in an enclosed space. A downdraft vent system pulls air through the kiln and exhausts it outside, protecting both you and your work. Even if your studio has good airflow, a dedicated vent improves firing results and extends the life of your elements and lid.